Aseptic Bags for Juice and Fruit Puree

AGICO supplies flexible aseptic bags for fruit juice, juice concentrate and fruit puree. They serve as inner packaging for small-format bag-in-box (BIB) and bulk liquid food applications. The supplier's stated capacity range is 2–220 L; the film, bag dimensions and filling spout must be selected for the product and filling line. A documented 220 L metallized bag is shown as a reference model below.

Where These Bags Are Used

Juice processors use aseptic inner bags when filling and moving liquid products in flexible packaging. The right configuration depends on the liquid, filling process, required barrier, handling method and outer container. Tell us whether you are packing ready-to-drink juice, concentrate or fruit puree so the bag and spout can be reviewed for that application.

Available Sizes and Options

The supplier lists a 2–220 L range, including metallized, aluminum-foil and transparent bag options. Availability and performance vary by configuration; confirm the selected capacity, film and spout before placing an order.

Bag-in-Box Packaging and Bulk Aseptic Bags

Small-format BIB bags are flexible inner bags used with outer cartons and suitable filling or dispensing fittings. Bulk aseptic bags use a larger flexible inner bag with an appropriate outer handling container. This page describes the bags; ask us to specify any carton, drum or other outer packaging separately in the quotation.

Bag-in-box packaging illustration. Confirm the supplied carton and fitting for your order.

Illustrative tap arrangement; fitting details are subject to confirmation.

Example of flexible bag liners used with outer drums; configuration is subject to confirmation.

Film Structure and Barrier Selection

The documented 220 L model uses a metallized VMPET composite outer film and separate LLDPE inner layers. Its stated oxygen transmission rate is below 1.0 cc/m² per 24 hours. This is a film specification, not a promised shelf life for filled juice. Other film options mentioned by the supplier include aluminum foil and transparent structures; request the corresponding specification before selecting one.

220 L Metallized Aseptic Bag: Reference Specification

The following data apply only to supplier model FD17A220S. Other bag sizes and film types require their own confirmed specifications.

Spout and Filler Compatibility

A bag is suitable for a filling line only when its spout, cap, position and dimensions match the filling head and handling process. Send the filler model, filling-head details and a photo or drawing of the required fitting. AGICO can then check the proposed bag configuration before quotation. A matching capacity alone does not establish machine compatibility.

Related equipment: AGICO aseptic bag filling machine. Confirm the operating capacity and fitting of the specific machine before ordering bags.

Illustrative filling process. Confirm the machine interface for the selected bag.

Storage and Handling Before Filling

For the documented 220 L model, the supplier specifies dry, dust-free storage at 15–25°C, away from direct sunlight, and recommends using the bags within 24 months of delivery. Keep the original packaging intact until the bags are needed, and inspect the film and fitting before use. Follow the filling line's validated aseptic procedure; the stated irradiation dose does not by itself define every on-site handling step.

What to Include in Your Inquiry

To help us identify a suitable bag, please send your liquid product and intended process, target bag capacity, filler model and filling-head details, required outer packaging, estimated order quantity and destination. If you need specific food-contact, irradiation or quality documents, list them in the same inquiry so their availability can be checked.

Frequently Asked Questions

Can I use these bags with my existing aseptic filler?

Compatibility must be checked against the actual filling head, spout design, bag size and handling setup. Please send your machine model and fitting details before ordering.

Do you supply only 220 L bags?

No. The supplier describes a wider 2–220 L range. The detailed technical figures on this page, however, apply only to the documented 220 L model FD17A220S; ask us to confirm specifications for other sizes.

Is an outer carton or drum included?

The flexible inner bag is the product described here. Tell us if you also need an outer carton or drum so the quotation can state exactly what is included.

How should I select the film and spout?

Share the liquid, filling process, desired bag size, outer container and filler interface. The supplier can then confirm an available film structure and fitting for review.

Request a Bag and Filler Compatibility Check

Send AGICO your product, target capacity and filling-machine details to request a bag recommendation and quotation. We can review the proposed film, dimensions and fitting with the supplier before you place an order.